Toray Industries. Inc.
Toray Engineering Plastics
Toray Group USA
Penfabric Textile Group
www.mtsf.org
   
 
TYPICAL PROPERTIES OF TOYOLAC 700    314
Typical Properties   Test Method   Test Conditions   SI Unit   Typical Value
Physical
Specific Gravity   ASTM D792       -   1.05
Water Absorption   ASTM D570   23oC x 24 hours   %   0.3
Mould Shrinkage   ASTM D955       %   0.4 ~ 0.6
Rheological
Melt Flow Rate   ISO 1133   220oC / 10 kg   g/10 min   25
Mechanical
Tensile stress at yield   ASTM D638   at 5 mm/min   MPa   49
Tensile strain at break   ASTM D638   at 5 mm/min   %   35
Flexural Strength   ASTM D790   at 3 mm/min   MPa   76
Flexural Modulus   ASTM D790   at 3 mm/min   MPa   2450
Rockwell Hardness   ASTM D785   R scale   -   116
Impact
Izod Impact Strength, notched   ASTM D256   12.7 x 62.5 x 12.7tmm (23oC)   J/m   196
    ASTM D256   12.7 x 62.5 x 12.7tmm (0oC)   J/m   108
    ASTM D256   12.7 x 62.5 x 12.7tmm (-30oC)   J/m   80
Izod Impact Strength, notched   ASTM D256   12.7 x 62.5 x 3.2tmm (23oC)   J/m   212
    ASTM D256   12.7 x 62.5 x 3.2tmm (0oC)   J/m   157
    ASTM D256   12.7 x 62.5 x 3.2tmm (-30oC)   J/m   118
Thermal                
HDT (Unannealed) 127 x 12.7 x 12.7tmm   ASTM D648   1.82 MPa Loading, 18.56 kg/cm2   oC   92
HDT (Unannealed) 127 x 12.7 x 6.4tmm   ASTM D648   1.82 MPa Loading, 18.56 kg/cm2   oC   87
Thermal Conductivity   ASTM C177       W/K.m   0.15
Coefficient of Linear Thermal Expansion   ASTM D696       mm/mmoC   7.1 x 10-5
Flammability
Flammability   UL 94       -   HB
Electrical
Specific Surface Resistivity   ASTM D257   at 23oC   ohm   >1016
Specific Volume Resistivity   ASTM D257   at 23oC   ohm.cm   >1016
Dielectric Strength   ASTM D149   Short Time   KV/mm   23
Dielectric Constant   ASTM D150   1000 Hz   -   3.1
Power Factor   ASTM D150   1000 Hz   -   6.1 X 10-3

Go back

   
Home | About Us | Products | Sales Network | Technical/Center | Procurement | Topics/News | Contact Us
Copyright 2005 © Toray Plastics (Malaysia) Sdn. Bhd.